次数分布表

差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

--- 次数分布表 [2024/03/16 16:01] – zwz
+++ 次数分布表 [2024/03/26 03:09] (当前版本) – 李佳熠2
@@ 行 21: / 行 21: @@
 Proportions are the proportions of the whole group with value X. The formula is as follows.
-{{:2.1.3.png?100|}}
+{{ :2.1.3.png?100 |}}
 百分比（percentages）就是将小数形式的比例乘以100转换而成的。
@@ 行 33: / 行 33: @@
 当样本可取的数据的数值比较多时，我们就需要对数值进行分组。进行分组数据统计，关键的一点就是划分数据区间，也就是确定每组的取值范围。每组中包含的数据值的最大值与最小值的差距我们称为组距，一般来说，81-90的数据组，我们认为80.5为数据值的最小值，而90.5为数据的最大值。全部数据的最大值与最小值的差距叫做全距。而当组数确定之后，我们可以大概确定组距，三者的关系为：
-{{ :2.1.4.png?100 |}}
+When the accessible data is abundant, it is necessary to divide them into groups. The key point to grouped data analysis is to divide the data intervals, that is to ascertain the value range of each groups. The division of the maximum and minimum is called group range. Usually, for a group from 81 to 90, the minimum is regarded as 80.5, while the maximum is regarded as 90.5. The division of the maximum and minimum of all the data is called range. And once the group amount is ascertained, the group range could be roughly estimated, the relationship of the three statistics are as follows:
+{{ :2.1.4.png?100 |}}
+(Group Range = Range/Group Amount)
 当然，组距一般取较为简单的数字，如10或者5的倍数，而且每组的起点也应该尽量简单。
+Meanwhile, the group range is usually set as simple numbers like the multiples of 5 or 10, and the starting point of each group should also be as simple as possible.

次数分布表.1710604863.txt.gz · 最后更改: 2024/03/16 16:01 由 zwz